Author Archives: Paul Morgan

CCNA PT Lab 8 OSPF Single Area

Configure R1 with the following :- 10.0.0.0/30 Network IP 10.0.0.110.0.0.8/30 Network IP 10.0.0.9  OSPF Area 0 Process ID 1  10.0.0.0/3010.0.0.8/3082.100.100.0/24 Configure R2 with the following :- 10.0.0.0/30 Network IP 10.0.0.210.0.0.4/30 Network IP 10.0.0.510.0.1.0/24 First IP of SubnetLoopback0 – IP 2.2.2.2/32 OSPF Area 0 Process ID 1  10.0.0.0/3010.0.0.4/3010.0.1.0/24 Passive Interface for 10.0.1.0/24 Network Configure R3 with theContinue reading “CCNA PT Lab 8 OSPF Single Area”

CCNA PT Lab 7 VTP Configuration

VTP Configuration Configure the following VLAN’s on the switch, each VLAN name is case sensitive. VLAN 10 – SalesVLAN 20 – MarketingVLAN 30 – DevelopmentVLAN 40 – HRVLAN 50 – ITManagement Set SW1 to be the VTP Server with the VTP domain cisco and the VTP password to cisco1 SW2 & SW3 to be VTPContinue reading “CCNA PT Lab 7 VTP Configuration”

CCNA PT Lab 6 Basic VLAN Configuration

Simple VLAN Configuration Configure the following VLAN’s on the switch, each VLAN name is case sensitive.  VLAN 10 – Sales VLAN 20 – Marketing VLAN 30 – Development VLAN 40 – HRVLAN 50 – ITManagement  Assign ports F0/1 to F0/4 to VLAN 10 Assign ports F0/5 to F0/10 to VLAN 20 Assign ports F0/11 to F0/14 to VLANContinue reading “CCNA PT Lab 6 Basic VLAN Configuration”

CCNA PT Lab 5 – DHCP Server

DHCP Lab Configure the first ip addess of the labelled subnets for g0/0 and g0/1 and enable. Configure DHCP Pools called “Sales” (192.168.1.0/24) and “Marketing” (192.168.2.0/24) on R1, pool names are case sensitive  Set the default gateway for each pool to the router interface IP.  Add DHCP exclusions for first 10 IP addresses of eachContinue reading “CCNA PT Lab 5 – DHCP Server”

CCNA PT Lab 4 – Static Routing with Backup

Static Routing with Backup Route Configure G0/0 on R1 and R2 to be the first IP of the labelled subnets Configure G0/1 on R1 to be 1st IP of 10.0.0.0/30 subnet and G0/1 on R2 to be the last. Configure G0/2 on R1 to be 1st IP of 10.0.0.4/30 subnet and G0/1 on R2 toContinue reading “CCNA PT Lab 4 – Static Routing with Backup”

CCNA PT Lab 3 Static Routing

Static Routing Configure G0/0 on R1 and R2 to be the first IP of the labelled subnets Configure G0/1 on R1 to be 1st IP of 10.0.0.0/30 subnet and G0/1 on R2 to be the last. Create static routes on R1 and R2 to allow PC0 and PC1 to ping each other. Routes should beContinue reading “CCNA PT Lab 3 Static Routing”

Design a site like this with WordPress.com
Get started